A Division of Benny Gage Inc.
4875 Product Dr Suite A
Wixom, MI 48393
|This type of spindle is used to check small holes from .062 to .250 diameter and also for tapped holes. |
| ||Diameter at contact point is .005 smaller than min. part dia. |
Min. size of pilot "B" is .375 dia.
Standard for dim. "C" is .38, options available at additional cost.
COMMON NOTE: The part tolerance plus the T.I.R. must not exceed the total indiacator travel, Lap bushing to obtain a gage fit for pilot dia. "B".